place the kitchen verifying that the tube will not be twisted or crushing then proceed to the tightening of connections with wrench fixing the correct size (no parrot or pipe as crushing leads to the fitting deformation) starting, in the case, before the male fitting. 3. check the tightness of sprinkling fittings with soapy water and then open the mural tap, in the case of formation of bubbles close the tap and check the tightness again. in the case of the pipe disassembly repeating the previous operations described above in reverse. make sure that the hose guarantees, according to the technical specifications, a range of appropriate flow, install in accordance with national and local regulations, respecting the normal rules of custom and practice. the tube is produced according to the rules stated on the front of these instructions. either follow these installation instructions and those of the cooking appliance manufacturers, including those for the position and orientation of the connection point as well as the creation of the earth if it is also equipped with wiring, otherwise decay immediate guarantee without any responsibility on our part for any damage that may ensue. and 'it is forbidden to install the tube in areas with temperatures higher than 60 ° c; connect two or more pipes together; installed through walls, floors or ceilings; install upstream of the pressure reducing valve; used in case of noticeable deterioration or destruction of any part of the tube; reuse the same seal in case of disassembly (replace it every time in accordance with a); create the radii of curvature of less than 60mm.
Registered users can share their experience with this product. Register to access all of the benefits reserved to registered users or click on login if you are already registered.